Livestock Animal Feed Pellet Production Line Chicken Feed
Processing Machine
Introduction of feed pellet production line:
Feed set is short for small manual batching modular feed set which
capacity usually no larger than 5t/h. It adopts the design of
building block system modular type which will be easy to
dismounting, transportation and assembly. Low investment, quick
returns, compact structure, small occupy, low demand for land, low
cost for construction, and customized design is also optional. The
feed set is suitable for small feed factory and farm.
Technological characteristics and introductions:
RM receiving and cleaning process: Granules and powder material
will be put into the production line separately though two inlet,
the granules will be screened and cleaned to remove impurities by
pre-cleaner, then remove the iron before it go into the hammer
mill, the powder material should be cleaned in advance.
Grinding process: adopts FDSP's tear circle hammer mill which can
make both coarse grinding and fine grinding, the feeder is combined
together with the pre-cleaner which can clean the material and also
feeding into the hammer mill, variable frequency control, evenly
feeding and equipped with pulse filter. Mechanical induct
discharging. The process is simple and with low cost, it is
suitable for small capacity and multi type of material's grinding.
Grinding machine: hammer mill SFSP568-I with power 30KW, output:
3-5t/h
Mixing process: there is pre-mixing bin upper the mixer which can
make the feeding continuously when mixer working, the mixed
material can go into the pre-pelleting bin and mesh feed bins
separately to meet the requirement for producing mesh feed and
pellet feed at same time.
Mixing equipment: double shaft paddle mixer SHSJ1 with 11kw,
500kg/P, homogeneityCV≤5%
Pelletizing process: adopt one pellet mill with single conditioner
which is suitable for normal poultry feed and ruminant feed
production. the material go into the cooler directly after pellet
mill, then go into the crumbling and screening system through
bucket elevator, manual packing at last.
Pelletizing equipment: pellet mill SZLH32 with 37kw, output:
2-5t/h.( ¢3.5 normal broiler feed formula)
Cooling equipment: counter flow cooler SKLN1.5 with output 3-4t/h
Crumbler: SSLG15x80 with output 2-3t/h, it can crumble the large
feed pellets into small pellets to produce small chicken grow
seedling feed. the crumbler is designed with bypass system so the
material can be go into the screener though by pass when no need to
use crumbler.
Screening equipment: Plan rotary screener SFJH80×2C with capacity
4-6t/h
Auxiliary system: liquid adding system could adding oil into the
mixer to improve feed palatability. Air compressing system is used
to supply compressed air for pneumatic components.
Main Parameters Of Feed Pellet Machine |
| | | | | | |
| | | | | | |
|
| | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
