1-5TPH poultry livestock feed particle machine particle production
equipment
Feed pellet molding
For the ring mold pellet feed machine, when the material moisture
into the processing is too low, the surface quality of the
processed pellet feed is smooth and hard, not easy to digest and
absorb animals, and the processing process power consumption is too
large, low productivity, tons of power consumption;
When the moisture is too high, the appearance of the processed
granular feed is rough, the molding rate is low, and it is prone to
mildew and fragmentation in the transportation process, and it will
also cause wear between the die rollers.
In the process of feed processing with flat die machine, the water
is too low sometimes cause the plug of die hole, at the same time
reduce output, increase the power consumption of tons, so as to
increase the production cost; When the moisture is too high, the
shape of pellet feed can not meet the technical requirements, the
product forming rate is reduced, and it is not easy to store and
transport.
Generally processed granular feed moisture should not be higher
than 12.5%; But in the north can not be higher than 13.5%, if the
pellet feed processing in the summer, due to the higher
environmental temperature, so the moisture of the finished particle
is not higher than 12.5%, otherwise easy to moldy deterioration.
This machine is the key equipment of pellet feed production, it has
the characteristics of high output, good performance, low energy
consumption, low noise, beautiful appearance, is the ideal
equipment for pressing poultry, livestock, fish pellet feed. 87
years the first ministry, provincial quality products title.
The feeding system of the machine adopts stepless variable speed
motor control machine, convenient and reliable speed regulation.
And can be equipped with microcomputer automatic control system,
can automatically adjust the amount of feed and steam, so that the
press is always in the best working state.
Parameter
| Model | SZLH250 | SZLH320 | SZLH350 | SZLH420 | SZLH508 |
| Power(KW) | 22 | 37 | 55 | 110 | 160 |
| Capacity(T/H) | 1 | 2-4 | 5-7 | 8-10 | 15-20 |
| Inner dia(mm) | 250 | 320 | 350 | 420 | 508 |
| Pellet size(mm) | 2-8 | 2-8 | 2-18 | 2-18 | 2-18 |
Introduction:
The pellet feed molding machine is a feed granulation equipment. It
is a feed processing machine that directly compresses particles by
crushing materials such as corn, soybean meal, straw, grass, rice
husk, and peanut meal.
How to reduce the cost of feed and meet the nutritional needs of
various livestock and poultry has become the primary problem that
the majority of farmers and feed industries need to solve urgently.
Straw biochemical protein feed technology is to pass the crop straw
through pulverization, granulation and other technical measures, so
that lignin is softened, crude protein, crude fiber, crude fat and
the like are degraded into substances that are easily digested and
absorbed by poultry, and a large amount of fermentation is also
produced. The bacterial protein becomes soft and ripe after
fermentation, and the granulation increases the palatability of the
livestock. The average level of crude protein and amino acid is
increased by 40.6% and 95.8%, and the levels of arginine, cystine
and histidine are increased. It has also been greatly improved,
sugar and fat content increased, and vitamins and growth factors
such as B, D, and E are produced, and then mixed with other raw
materials to prepare full-price feed. The pellet feed machine
presses into nutrient-rich feed pellets to feed the livestock. The
amount is increasing and the growth is accelerated. Reducing food
input (the nutritional value of 270 kg of grain feed per ton of
straw feed) saves on feed costs and increases farmers' income.
