Manufacturer of small feed pellet machine for breeding
Introduction:
The diameter is 2mm-8mmThis kind of animal feed pellet mill is
designed to make pellet foranimal/poultry food. The raw materials
can be the corn, grain, soybean, peanut, wheat, straw powder, and
others. Put the mixed materials into the hopper, don’t need to add
the water and heating.
Raw material:
By purchasing our household Small feed pellet machine, you can
receive a variety of poultry animal feed formulas for free, such as
corn, straw, grass and other grains and grasses can be processed
into feed pellets.
Technical parameter:
Model | Yield(kg/h) | Granulation rate | Particle diameter(mm) | Power(kw) | Weight(kg) |
SH-125 | 80-100 | ＞95 | 3-30 | 3-4 | 65 |
SH-150 | 90-150 | ＞95 | 3-30 | 4.5 | 70 |
SH-160 | 150-200 | ＞95 | 3-30 | 4.5 | 70 |
SH-210 | 200-300 | ＞95 | 3-30 | 7.5-11 | 175 |
SH-230 | 300-400 | ＞95 | 3-30 | 11-15 | 265 |
SH-260 | 400-500 | ＞95 | 3-30 | 15-18.5 | 320 |
SH-300 | 500-700 | ＞95 | 3-30 | 18.5-22 | 515 |
SH-400 | 900-1200 | ＞95 | 3-30 | 30-37 | 650 |
Features of small feed pellet machine:
1. Simple structure, wide application, small floor space, low noise
level
2. Only need to add a little amount of liquid or no need at all to
make powdery feed and grass meal into granules.Thus moisture
content of granule feed is basically the same moisture content
before granulation, so as to be easily stored.
3. Feed of chicken, duck, fish etc guarantees higher economic
benefit than mixing powdery feed.
4. Feed granules made from dry materials are with higher hardness
level, smooth surface, cooked inside and will make nutrition easily
digested.
5. The formation process of granules will make pancreatic enzyme
boycott factor in grains and beans denaturized, to reduce bad
effects on digestion and kill all kinds of parasite eggs and other
pathogenic microorganisms and reduce all kinds of parasitic and
digestive system diseases.
Precautions for household Small feed pellet machine:
1. Be sure to add gear oil before the machine is used for the first
time to prevent idling and abrasion of the transmission parts.
2. Before turning on the domestic Small feed pellet machine, you
need to add less material before turning it on. When turning off
the machine, leave a little feed in the machine to prevent the
press roller of the machine from contacting with the grinding disc
from idling.
3. During granulation, it is strictly forbidden that the pressure
roller and the grinding disc contact idling, and the continuous
feeding can not be too fast, not too slow, and not interrupted.
4. When there is no granulation and no discharge, the grinding disc
should be removed, the blocked feed should be cleaned hole by hole,
and some fiber feed can be added appropriately to restart the
pelletizing.
5. If the machine is stuck when it is working, it should be shut
down immediately, and the distance between the rollers and grinding
discs should be adjusted before restarting.
