Livestock Feed Pellet Mill Machine Chicken Feed Pellet Machinery
Product description of feed pellet mill machine
Ring die pellet machine (also known as: ring die pellet feed
machine, ring die pellet feed forming machine) belongs to feed
pelleting equipment. It is a feed processing machine that directly
presses particles from crushed materials such as corn, soybean
meal, straw, grass, rice husk, etc. Ring die pellet mill is the
main feed machinery and equipment for the production of pellet
feed. Its performance determines the output of feed processing to a
large extent, and occupies a very important position in the process
of feed processing.
Parameter of feed pellet mill machine
| Model No. | Main motor power | Capacity (t/h) | Ring die inner diameter (mm) | Feeder power (kw) | Conditioner motor power (kw) | Size (mm) | Weight (kg) |
| SZLH250 | 22kw | 0.6-1 | 250 | 0.75 | 1.1 | 1750×650×1750 | 800 |
| SZLH320 | 37kw | 1-3 | 320 | 0.75 | 2.2 | 1900×1800×1650 | 2000 |
| SZLH350 | 55kw | 3-5 | 350 | 0.75 | 2.2 | 2100×2000×1850 | 2400 |
| SZLH420 | 110kw | 8-10 | 400 | 1.5 | 4 | 2200×2000×2150 | 2900 |
| SZLH508 | 132/160kw | 10-18 | 450 | 1.5 | 4 | 2300×2350×2150 | 3500 |
Features:
1. Simple structure, wide adaptability, small footprint and low
noise.
2. Powdered feed and grass powder can be pelletized without adding
a little liquid, so the moisture content of pelleted feed is
basically the moisture content of the material before pelleting,
which is more convenient for storage.
3. Chicken, duck, fish, etc. can obtain higher economic benefits
than mixed powder feed.
4. Dry material processing produces feed pellets with high
hardness, smooth surface and internal ripening, which can improve
the digestion and absorption of nutrients.
5. The granule formation process can denature the pancreatic enzyme
resistance factor in grains and beans, reduce the adverse effect on
digestion, kill various parasite eggs and other pathogenic
microorganisms, and reduce various worms and digestive system
diseases.
Feeding method
The ring die granulator adopts mechanical forced feeding,
high-speed rotation and centrifugal distribution into the
granulation chamber, and the material is distributed by the
scraper, and the feeding is uneven; .
Pressure
In a mold with the same diameter, the diameter of the ring die
pressing wheel is limited by the diameter of the ring die, so the
pressure is limited; the diameter of the flat die pressing wheel is
not limited by the diameter of the die, and the space for the
built-in bearing can be increased. The No. 1 bearing enhances the
bearing capacity of the pressure roller, which not only improves
the pressing force of the pressure roller, but also prolongs the
service life.
Outlet method
The ring die belongs to high speed, and the breakage rate is high
when the material is discharged; while the flat die belongs to low
speed, and the breakage rate is low.
Pressure wheel adjustment method
The ring die granulator uses two screws on the eccentric wheel in
the middle of the pressure wheel to adjust the pressure; the flat
die granulator uses a threaded screw rod m100 center adjustment
mechanism, with a jacking force of 100 tons, stable falling, soft
touch, and pressure. evenly. There are two ways of rotating manual
and hydraulic automatic adjustment.
From the comparison between the flat die and the ring die, we can
see that the pressure of the flat die is larger than that of the
ring die, so it is better to use the flat die for the coarse fibers
that are light and difficult to form, such as wood chips and straw.
